On Sale Now !

Multi Shot Rubberband Gun

Bugsy Siegel Rubberband Gun



Customizable Pattern

Color Assembly Guide Included

For Laser or Scroll Saw cutting.
Can be cut on CNC Router but some filing and or sanding will be required on inside corners.
Small router bits 1/16th will be needed.
Requires some glue and small hardware available at your local hardware store.

Bugsy Siegel

Benjamin "Bugsy" Siegel, born Benjamin Siegel; February 28, 1906 – June 20, 1947, was an American mobster with the Genovese crime family. Nicknamed "Bugsy", Siegel was known to be ruthless with associates and was known as one of the most "infamous and feared gangsters of his day". Described as handsome and charismatic, he became one of the first front-page-celebrity gangsters. He was also a driving force behind the development of the Las Vegas Strip.
Siegel was one of the founders and leaders of Murder, Incorporated and became a bootlegger during Prohibition. After Prohibition was repealed in 1933, he turned to gambling. In 1936, he left New York and moved to California. In 1939, Siegel was tried for the murder of fellow mobster Harry Greenberg. Siegel was acquitted in 1942.
Siegel traveled to Las Vegas, Nevada where he handled and financed some of the original casinos. He assisted developer William Wilkerson's Flamingo Hotel after Wilkerson ran out of funds. Siegel took over the project and managed the final stages of construction. The Flamingo opened on December 26, 1946 to poor reception and soon closed. It reopened in March 1947 with a finished hotel. Three months later, on June 20, 1947, Siegel was shot dead at the Beverly Hills home of his girlfriend, Virginia Hill.
 
PLEASE NOTE:

It is assumed in all makeMZ Rubber Band Guns
that the end user will decide how thick they want
the  parts of the gun to be.
If you have a lower powered laser you can cut all parts from 3mm or 1/8th 
inch woods and glue them as shown in the assembly guides.
Or you can use thicker materials if you have a more powerful laser
or CNC router. It is important to note that if cutting with a CNC router you will need to sand and file certain parts of the guns to get proper fitting square corners on parts.
Also, the length and size of bolts and nuts used are your choice, although we recommend
4-40 machine screws with T-nuts for a flush finish and if using metric you will need to use the equivalent.
You will need a selection of rubber bands, small springs and small eyelets and hooks to
complete most of these projects. These items should all be available at your local hardware store.
You can easily change the hole size in the DXF using your CAD software but do not change the position of holes.
 You may also want to customize the guns stocks and handles using thicker exotic woods and sanding and engraving paths
The main trigger mechanisms and moving parts should be cut from 3mm or 1/8th
thick material in most cases.