ON SALE NOW!

This Puzzle is included in Volume Six.

All puzzles on this volume now have not only Laser versions but we
have added a Router version as well. The Router versions have Dog
Bone Fillets to compensate for the cutter used that do not allow
sharp internal corners. Please see our learning pages if you are
unfamiliar with Dog Bone Fillets in CNC Routing. Scrollsaw users
would use the Laser versions.

PLEASE NOTE : ALL DOWNLOADABLE PRODUCTS ARE AVAILABLE INSTANTLY AFTER PAYMENT!

Please Note: If you have any issues with your download or miss the red download button available after checkout Email us

The Vintage Sports Car

The vintage sports car traces its roots to early 20th century touring cars and roadsters. These raced in early rallys, such as the Herkomer Cup, Prinz Heinrich Fahrt, and Monte Carlo.
Though the term would not be coined until after World War One, the first sports cars are considered to be the 3 litre 1910 Prince Henry (Prinz Heinrich) Vauxhall 20 hp and the 27/80PS Austro-Daimler designed by Ferdinand Porsche.
These would shortly be joined by the French DFP which became sporters after tuning by H.M. and W. O. Bentley and the Rolls-Royce Silver Ghost. In the U.S., where the type was variously called roadster, speedster, runabout, or raceabout, there was Apperson, Kissel, Marion, Midland, National, Overland, Stoddard-Dayton, and Thomas among small models, while Chadwick, Mercer, Stutz, and Simplex were among large models.
Some sport cars have used the front-engine, front-wheel drive layout, e.g. Fiat Barchetta, Saab Sonett and Berkeley cars. This layout is advantageous for small, light, lower power sports cars, as it avoids the extra weight, increased transmission power loss, and packaging problems of a long driveshaft and longitudinal engine of FR vehicles. Yet, its conservative handling effect, particularly understeer, and the fact that many drivers believe rear wheel drive is a more desirable layout for a sports car make this layout atypical to high-performance sports cars. The FF layout, however, is common in sport compacts and hot hatches, and cars in general excepting sports cars.
Before the 1980s few sports cars used four-wheel drive, which had traditionally added a lot of weight. Although not a sports car, the Audi Quattro proved its worth in rallying. With its improvement in traction, particularly in adverse weather conditions, four-wheel drive is no longer uncommon in high-powered sports cars, e.g. Porsche, Lamborghini, and the Bugatti Veyron.

Collect your Vintage Sports Car Today!

Hello and thanks for shopping with Makecnc!
These 3D puzzles are a downloadable product that have been made ready to cut on any CNC router or CNC laser machine.
They are supplied as ready-to-cut DXF vector files for CNC routers and EPS for CNC lasers machines.
CNC hobbyists receive excellent value for money with each package containing the following:

Imperial:

1/8 inch
1/4 inch
1/2 inch

Metric:

3mm
6mm
12mm

both in DXF or EPS format
1 X Clear and concise color assembly manual.

NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8" uses 1/8" Plywood...1/4" uses 1/4" Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting.

All the hard work is done!
Makecnc is excited to bring to the CNC hobbyist a new and ever-expanding library of art and projects made ready-to-cut on your CNC machine!You can either sell the cut out projects as your own product or assemble them for your own enjoyment and to give as gifts to your family and friends.

PLEASE READ COPYRIGHT

All downloadable products are copyright makecnc.com and may not be copied or redistributed in any format other than actual material products made from the supplied files.
Assembly PDF files may be sold as printed copies only along with a product made from the supplied files.

Unless otherwise stated in the documentation and product description you may make as many hard products as you like from your files with no royalty to the designer.