ON SALE NOW!

All puzzles on this volume now have not only Laser versions but we
have added a Router version as well. The Router versions have Dog
Bone Fillets to compensate for the cutter used that do not allow
sharp internal corners. Please see our learning pages if you are
unfamiliar with Dog Bone Fillets in CNC Routing. Scrollsaw users
would use the Laser versions.

This Puzzle is included in Volume Five.

PLEASE NOTE : ALL DOWNLOADABLE PRODUCTS ARE AVAILABLE INSTANTLY AFTER PAYMENT!


Please Note: If you have any issues with your download or miss the red download button available after checkout Email us

The Tip Truck or Dump Truck

A dump truck is a truck used for transporting loose material, such as sand, gravel, or dirt for construction. A typical dump truck is equipped with a hydraulically operated open-box bed hinged at the rear, the front of which can be lifted to allow the contents to be deposited on the ground behind the truck at the site of delivery. In the UK and Australia the term applies to off-road construction plant only, and the road vehicle is known as a tipper, tipper lorry, or tip truck.

The dump truck is thought to have been first conceived in the farms of late 19th century Western Europe. As early as 1905, the first motorized dumping vehicles were developed. The first motorized dump trucks in the United States were developed by small equipment companies such as Galion Buggy Co. and Lauth-Juergens among many others around 1910.
A standard dump truck is a truck chassis with a dump body mounted to the frame. The bed is raised by a hydraulic ram mounted under the front of the dumper body between the frames, and the back of the bed is hinged at the back to the truck. The tailgate can be configured to swing on hinges or it can be configured in the "High Lift Tailgate" format wherein pneumatic rams lift the gate open and up above the dump body.
In the United States, a standard dump truck has one front axle, and one or more rear axles which typically have dual wheels on each side. Rear axles are either powered or unpowered. Most unpowered rear axles can be raised off the pavement, to minimize wear and tear when the truck is unloaded or lightly loaded, and lowered to become load-bearing when the truck needs the extra support. These are referred to as lift axles or drop axles. Lift axles can be steerable or non-steerable; steerable lift axles are always configured with single wheels on each side, instead of dual wheels. Lift axles positioned in front of the powered axles are called pushers; lift axles positioned behind the powered axles are called tags. A trailing tag is a special type of tag mounted on an arm that extends 12 to 15 feet behind the truck frame to extend the overall outer bridge length of the vehicle.
Collect your Dump Truck Today!

Hello and thanks for shopping with Makecnc!
These 3D puzzles are a downloadable product that have been made ready to cut on any CNC router or CNC laser machine.
They are supplied as ready-to-cut DXF vector files for CNC routers and EPS for CNC lasers machines.
CNC hobbyists receive excellent value for money with each package containing the following:

Imperial:

1/8 inch
1/4 inch
1/2 inch

Metric:

3mm
6mm
12mm

both in DXF or EPS format
1 X Clear and concise color assembly manual.
1 product shot in jpg format.

NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8" uses 1/8" Plywood...1/4" uses 1/4" Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting.

All the hard work is done!
Makecnc is excited to bring to the CNC hobbyist a new and ever-expanding library of art and projects made ready-to-cut on your CNC machine!You can either sell the cut out projects as your own product or assemble them for your own enjoyment and to give as gifts to your family and friends.

PLEASE READ COPYRIGHT

All downloadable products are copyright makecnc.com and may not be copied or redistributed in any format other than actual material products made from the supplied files.
Assembly PDF files may be sold as printed copies only along with a product made from the supplied files.

Unless otherwise stated in the documentation and product description you may make as many hard products as you like from your files with no royalty to the designer.