Porsche
Porsche
Price: $5.00
Quantity:

ON SALE NOW!

All puzzles on this volume now have not only Laser versions but we
have added a Router version as well. The Router versions have Dog
Bone Fillets to compensate for the cutter used that do not allow
sharp internal corners. Please see our learning pages if you are
unfamiliar with Dog Bone Fillets in CNC Routing. Scrollsaw users
would use the Laser versions.


This Puzzle is included in Volume Five.

PLEASE NOTE : ALL DOWNLOADABLE PRODUCTS ARE AVAILABLE INSTANTLY AFTER PAYMENT!


Please Note: If you have any issues with your download or miss the red download button available after checkout Email us

The Porsche

Porsche SE is the owner of Dr. Ing. h.c. F. Porsche AG, and in June 2007 became a 
holding company for its stake in Porsche Zwischenholding GmbH which in turn holds 
100% of Porsche AG and 50.7% of Volkswagen AG.
Ferdinand Porsche founded the company called "Dr. Ing. h. c. F. Porsche GmbH" in 
1931, with main offices at Kronenstraße 24 in the centre of Stuttgart. Initially, 
the company offered motor vehicle development work and consulting, but did not 
build any cars under its own name. One of the first assignments the new company 
received was from the German government to design a car for the people, that is a 
"Volkswagen". This resulted in the Volkswagen Beetle, one of the most successful 
car designs of all time. The Porsche 64 was developed in 1939 using many components 
from the Beetle.
During World War II, Volkswagen production turned to the military version of the 
Volkswagen Beetle, the Kübelwagen, 52,000 produced, and Schwimmwagen, 15,584 
produced. Porsche produced several designs for heavy tanks during the war, losing 
out to Henschel & Son in both contracts that ultimately led to the Tiger I and the 
Tiger II. However, not all this work was wasted, as the chassis Porsche designed 
for the Tiger I was used as the base for the Elefant tank destroyer. Porsche also 
developed the Maus super-heavy tank in the closing stages of the war, producing two 
prototypes.
At the end of World War II in 1945, the Volkswagen factory at KdF-Stadt fell to the 
British. Ferdinand lost his position as Chairman of the Board of Management of 
Volkswagen, and Ivan Hirst, a British Army Major, was put in charge of the factory. 
In Wolfsburg, the Volkswagen company magazine dubbed him "The British Major who 
saved Volkswagen." On 15 December of that year, Ferdinand was arrested for war 
crimes, but not tried. During his 20-month imprisonment, Ferdinand Porsche's son, 
Ferry Porsche, decided to build his own car, because he could not find an existing one that he wanted to buy.
He also had to steer the company through some of its most difficult days until his father's release in August 1947.
The first models of what was to become the 356 were built in a small sawmill in Gmünd, Austria. The 
prototype car was shown to German auto dealers, and when pre-orders reached a set 
threshold, production was begun. Many regard the 356 as the first Porsche simply 
because it was the first model sold by the fledgling company. Porsche commissioned 
a Zuffenhausen-based company, Reutter Karosserie, which had previously collaborated 
with the firm on Volkswagen Beetle prototypes, to produce the 356's steel body. In 
1952, Porsche constructed an assembly plant across the street from Reutter 
Karosserie. The main road in front of Werk 1, the oldest Porsche building, is now 
known as Porschestrasse. The 356 was road certified in 1948.

Collect your Porsche today!

Hello and thanks for shopping with Makecnc!
These 3D puzzles are a downloadable product that have been made ready to cut on any CNC router or CNC laser machine.
They are supplied as ready-to-cut DXF vector files for CNC routers and EPS for CNC lasers machines.
CNC hobbyists receive excellent value for money with each package containing the following:

Imperial:

1/8 inch
1/4 inch
1/2 inch

Metric:

3mm
6mm
12mm

both in DXF or EPS format
1 X Clear and concise color assembly manual.
1 product shot in jpg format.

NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8" uses 1/8" Plywood...1/4" uses 1/4" Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting.

All the hard work is done!
Makecnc is excited to bring to the CNC hobbyist a new and ever-expanding library of art and projects made ready-to-cut on your CNC machine!You can either sell the cut out projects as your own product or assemble them for your own enjoyment and to give as gifts to your family and friends.

PLEASE READ COPYRIGHT

All downloadable products are copyright makecnc.com and may not be copied or redistributed in any format other than actual material products made from the supplied files.
Assembly PDF files may be sold as printed copies only along with a product made from the supplied files.

Unless otherwise stated in the documentation and product description you may make as many hard products as you like from your files with no royalty to the designer.