On Sale Now!
B9 Robot
A makeMZ ST original 3D puzzle
This is a Very Amazing Puzzle with some Finely detailed work in it!
This pattern is recommended for Laser as that will enhance the fine detail of this pattern. However, you can use a CNC Router or any method you choose but you will need very small bits to get the detail or hand finish with small files.
This is another one of Steves Excellent flagship models!
ALL DOWNLOADABLE PRODUCTS ARE AVAILABLE INSTANTLY AFTER PAYMENT!
Ready to cut downloadable Patterns and Projects for your CNC Router, Milling Machine, Plasma Cutter or Laser Machine and Scroll Saw in both Imperial Inch format as well as Metric size for the Global CNC Hobbyist.
Files include a Full Color Assembly Manual Copyright makeCNC!
Buy one: Collect them All! Impress your friends and family or make some extra cash with your CNC machine with your own product line at flea markets and craft shows!
B9 Robot
The B-9, Class M-3 General Utility Non-Theorizing Environmental Control Robot was a character in the television series Lost in Space. Known and addressed simply as "Robot", his full designation was only occasionally mentioned on the show.
Although a machine endowed with superhuman strength and futuristic weaponry, he often displayed human characteristics, such as laughter, sadness, and mockery, as well as singing and playing the guitar. The Robot was performed by Bob May in a prop costume built by Bob Stewart. The voice was primarily dubbed by Dick Tufeld, who was also the series' narrator and Jorge Arvizu for the Spanish dubbing. The Robot was designed by Robert Kinoshita, who also designed Forbidden Planet's Robby the Robot. Robby appears in Lost in Space episode #20 "War of the Robots" and in episode #60 "Condemned of Space". The Robot did not appear in the unaired pilot episode, but was added to the series once it had been greenlit.
Initially, the bellows-covered legs were articulated, and were moved separately by the actor inside. However, the metal edges inside the suit cut actor Bob May's legs, so changes were made. The legs were bolted together, and the robot was pulled along by a wire instead of walking as it had done before. A new lower section was constructed with the legs cut off at the knee. This was filmed either in close-up or behind something to obscure the actor's feet protruding out the bottom; this version of the suit was informally referred to by the cast and crew as "the Bermuda shorts."
Collect your B9 Robot Today!
Patterns may be scaled to the size you require for your material thickness using our Scale Calculator
CNC Routers Users ! Please See our Tutorial for information on dealing with Inside Corners and Dogbone Fillets
Each Zip File Includes:
2 or 4 CDR Files - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (Corel Draw Format for Laser)
2 or 4 DXF's - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (For Most CAD Programs)
2 or 4 SVG - Sizes you receive Depend on individual Product - usually in 1-8 and 3 mm and/or 1-4 and 6 mm Versions (Opens in Many CAD & Drawing Programs)
Printable PDF Pattern (For Scroll Saw Use)
1 X Clear and Concise Color Assembly Manual.
1 X Number Guide DXF (Also called Coded DXF - NOT in all Products - Only in Certain Products)
1 x Readme File and Copyright Information
1 X Product Notes - Letting you know an Approximate Height, Length and Width of your finished product and giving the Approximate Size of the Largest Part. These Approximations are given in Imperial and Metric. Remember, These are Approximate Sizes.
Approximate Size at 6mm
L= 221
W = 198
H = 516
Approximate Size at 1/4 inch
L = 8.7
W = 7.8
H = 20.3
Approximate Size of Largest Part
9 X 1.8 inches
229 X 46 mm
Approximate Part Number: 252
NOTE: Our 3D Puzzles can be built in different thicknesses.
Example: 1/8" uses 1/8" Plywood...1/4" uses 1/4" Plywood, etc.
As a rule, although the slots are set to fit the same sized tool, most
people will use a smaller bit size when cutting.
All the hard work is done!
MakeCNC is excited to bring to the CNC hobbyist a new and ever-expanding library of art and projects made ready-to-cut on your CNC machine!
You can either sell the cut out projects as your own product or assemble them for your own enjoyment and to give as gifts to your family and friends.
When you purchase a makeCNC pattern you are agreeing to our Copyright Terms. Please Click on the Link Below to View them! Thank You!
PLEASE READ: Here: COPYRIGHT TERMS
